Description
4.0m Heavy Duty Folding Stick Rake $9,750 + GST
New Makin Traks design • Built to Australian spec • Suits D3 to D6 size dozers • Swing-out folding wings — Makin Traks, Sunshine Coast QLD
- THE ONLY SWINGING FOLDING RAKE IN THE COUNTRY PRICED UNDER $10K
- 4.0m working width • 14 Bisalloy 450 tynes • Folds in — NO PILOT REQUIRED
- 12-MONTH STRUCTURAL WARRANTY ON BEAM & WELDS
Our 4.0m Heavy Duty Folding Stick Rake gives you the width of a big clearing rake with none of the transport headaches. A swing-out folding wing on each side takes the rake from 3.4m to a full 4.0m working width with 14 tynes, so you cover more ground on every pass. When the job’s done, swing them back in and move the machine without a pilot vehicle. Built for D3 to D6 size dozers on a 200mm x 200mm box section main beam with 18mm wall, with Bisalloy 450 tynes, 400mm long. And at $9,750 + GST, it’s the only swinging folding rake in the country priced under $10K.
STANDARD RAKE — 3.4m
$8,500 + GST
- 3.4m working width, 12 tynes
- 200 x 200mm box beam, 18mm wall
- Bisalloy 450 tynes, 400mm long
- Complete kit, ready to fit
- Approx. 900kg
- Suits D3 to D6 size dozers
FOLDING RAKE — 4.0m
$9,750 + GST
- 4.0m working width, 14 tynes
- Swing-out folding wing each side
- Folds in to 3.4m for transport
- No pilot required
- Approx. 1,050kg
- Suits D3 to D6 size dozers
STEP UP FOR JUST $1,250 MORE: At 5 km/h over an 8-hour day, the extra 600mm covers up to 2.4 more hectares (approx. 6 acres) than a 3.4m rake — 16.0 ha vs 13.6 ha.
WHO IT PAYS FOR
Property owners — turn rough land into real value. Clearing, stick raking and windrowing is a capital improvement. Timber, regrowth and rock come out, the topsoil stays put, and country that was unusable becomes land you can graze, crop, build on or sell. A 4.0m rake on the dozer you already own gets it done faster — adding maximum value to your property without paying a contractor.
Contractors — more work and a better hourly rate. A dozer with a stick rake is a land-clearing machine, not just a push machine. Raking work typically commands a higher hourly rate than straight dozing, and many clearing, windrowing and site-prep jobs won’t be awarded to a dozer without a rake. A 4.0m folding rake gets you the width clients want and the easy transport you need between jobs — and it can pay for itself on the contracts it wins you.
PAYS FOR ITSELF IN ABOUT A WEEK: At $220/hr with the rake, the 4.0m folding rake earns back its price in about 44 machine hours — just over one working week. The 3.4m rake takes about 39 hours.
IN-HOUSE FINANCE AVAILABLE
3.4m STANDARD RAKE
- approx. $48 / week
- $8,500 + GST
4.0m FOLDING RAKE
- approx. $55 / week
- $9,750 + GST
Pay it off weekly — at $220/hr, $55 a week is about 15 minutes of dozer work. Indicative repayments at 8% p.a. over 4 years on the ex-GST price, no deposit or balloon. Subject to finance approval; fees and charges may apply.
WHY THIS RAKE
• 4.0m working width, 14 tynes — more ground covered on every pass
• Swing-out folding wings — fold in for transport; no pilot required
• 200 x 200mm box section, 18mm wall — a seriously stiff main beam that won’t twist under load
• Bisalloy 450 tynes, 400mm long — high-hardness, abrasion-resistant steel that digs in, not just skims
• Keeps your topsoil — rakes out timber and rock while the soil falls through
• Suits D3 to D6 size dozers — one design across the most popular dozer classes
• Complete kit — arrives ready to fit; no chasing parts
• Built to Australian spec — made for Australian clearing conditions
• Designed by a dozer dealer — we sell and work on these machines every day
FITTING
This is a complete kit. The only work required is a small amount of fabrication on the back of your blade to weld on the mounting bosses the rake attaches to. Any competent fabricator can do it, or talk to us about having it done.
Working Width – 4.0m (3.4m with wings folded in)
Tynes – 14, Bisalloy 450, 400mm long
Main Beam – 200mm x 200mm box section, 18mm wall
Wings – Swing-out folding, 1 tyne each side
Transport – Fold in — no pilot required
Weight – Approx. 1,050kg
Suits – D3 to D6 size dozers
Build Standard – Built to Australian spec
Warranty – 12 months on beam & factory welds. Excludes customer fitment. Conditions apply.
Supplied As – Complete kit — mounting bosses fabricated onto rear of blade
4.0m FOLDING: $9,750 + GST • 3.4m STANDARD: $8,500 + GST
Order now or come and see one. Tell us your dozer make and model and we’ll confirm fitment. Freight can be arranged Australia-wide.
MAKIN TRAKS 12 Industrial Place, Yandina QLD 4561 • Sunshine Coast Daz Scale 0402 940 490 mkntraks@gmail.com • makintraks.com
